Blog · Paving · 7 min read

Asphalt Paving Cost Calculator: Tons, Square Feet, and What's Left Out

Calculate asphalt tons and paving cost from length, width, and thickness, compare material vs. installed price, and see what the math leaves out.

Asphalt Paving Cost Calculator: Tons, Square Feet, and What's Left Out

Installed asphalt paving runs about $3 to $7 per square foot nationally, according to HomeGuide, and a ton of hot mix covers roughly 55 square feet at 3 inches thick. The calculator below gives you both kinds of number: what the asphalt itself costs and what an installed job typically costs. The gap between the two is the useful part, because it shows how much of a bid is material and how much is everything else.

Quick answers

  • Installed cost: HomeGuide puts it at $3 to $7 per square foot.
  • Tons needed: square yards × thickness in inches × 110 lb, divided by 2,000.
  • Material only: HomeGuide puts the asphalt itself at $0.75 to $2.00 per square foot.
  • Not in the math: base stone, removal of old paving, grading, and small-job minimums.

Asphalt paving calculator

Length (feet)

Width (feet)

Thickness (inches)

Calculate

Uses 110 lb of asphalt per square yard per inch, hot mix at $40 to $80 per ton, and installed pricing of $3 to $7 per square foot. Estimates only, not a quote.

The calculator, step by step

If you'd rather run the numbers yourself, or check someone else's, here is the math.

  1. Find the area. Length × width in feet gives square feet. Divide by 9 for square yards.
  2. Convert to tons. Asphalt Magazine notes that "The typical application spread rate for asphalt mixtures is 110 lbs. per square yard per inch of thickness." Multiply square yards × inches × 110, then divide by 2,000.
  3. Check it. HomeGuide's coverage figures make a good sanity check: one ton covers about 80 square feet at 2 inches, 55 at 3 inches, 40 at 4 inches, and 30 at 5 inches.
  4. Price the material. HomeGuide says hot-mix asphalt costs $40 to $80 per ton, with delivery at $4 to $9 per ton within 15 to 20 miles.
  5. Price the installed job. Multiply square feet by HomeGuide's $3 to $7 per square foot installed.

Worked example: a 400-square-foot area at 3 inches

A 20-by-20-foot area is 400 square feet, or about 44.4 square yards. At 3 inches: 44.4 × 3 × 110 ÷ 2,000 ≈ 7.3 tons, which matches HomeGuide's 55-square-feet-per-ton figure (400 ÷ 55 ≈ 7.3).

  • Asphalt at $40 to $80 per ton: about $290 to $590
  • Delivery at $4 to $9 per ton: about $30 to $66
  • Installed at $3 to $7 per square foot: $1,200 to $2,800

The asphalt is a small slice of the installed number. For a driveway specifically, including tearing out the old one, see our asphalt driveway cost guide.

Worked example: a small 10-car parking lot

Angi says "[t]he average parking spot requires 300 to 350 square feet per car", including room to walk, so 10 spaces is roughly 3,000 to 3,500 square feet. At 3 inches, that's about 55 to 64 tons of asphalt. If you are repairing an existing lot rather than paving new, see our parking lot repair cost guide.

Angi prices asphalt for parking lots at $2 to $4 per square foot, with professional installation adding $1.50 to $2 per square foot. That's $3.50 to $6 per square foot combined, or roughly $10,500 to $21,000 for 3,000 to 3,500 square feet. Striping comes on top: Angi lists repainting lines at $500 to $1,200.

Overhead view of a small newly paved and striped ten-space parking lot


What the calculator leaves out

The formula covers the asphalt. A real job has more in it: If asphalt is one of several surfaces you are weighing, our guide to the cheapest driveway material compares them.

Compacted gravel base ready for asphalt with a roller and dump truck nearby


Cost by project type

The same math covers any paved area. HomeGuide publishes examples beyond driveways and lots:

ProjectTonsMaterial onlyInstalled
Garden path (3 × 100 ft)3 to 4$180 to $240$900 to $2,100
Sidewalk or walkway (4 × 50 ft)2 to 3$120 to $180$600 to $1,400
Sport court (30 × 50 ft)28 to 46$1,700 to $2,750$4,500 to $10,500
Private road (12 × 100 ft)22 to 37$1,300 to $2,200$3,600 to $8,400

The pattern holds across all of them: the installed price is several times the material price, and the smallest jobs have the biggest gap per square foot.

Why asphalt prices change from year to year

Asphalt pavement is mostly stone held together by liquid asphalt binder, a petroleum product, so its price moves with oil markets. Public agencies build this into their contracts. A Federal Highway Administration design-build example notes that "Price Adjustments are included in the Contract to provide additional compensation to the Design-Builder or a credit to the Administration for fluctuations in the cost of the following components of Work", a list that includes asphalt cement in hot mix asphalt. Several state transportation departments publish monthly asphalt price indexes for this purpose; Georgia's, for example, says that "Payments under Section 109 'Monthly Asphalt Cement Price' on eligible projects will be made using the Georgia Base Asphalt Price."

Homeowners and property managers don't get index adjustments, but the same forces reach private bids. In our experience, that's why a quote is usually only good for a limited time, and why a job priced one season can cost more the next.

Recycled asphalt and what it saves

Old pavement doesn't go to waste. Contractors grind it up and mix it into new asphalt as reclaimed asphalt pavement, or RAP. The National Asphalt Pavement Association reports the industry put "101.4 million tons of reclaimed asphalt pavement (RAP) back into use during the 2024 construction season," a practice it credits with "Saving taxpayers $4.7 billion compared to virgin materials." At the mix level, the association says that "Nationally, the average 21.1% RAP used in new asphalt mixtures saved $7.80 per ton, compared to mixtures using all virgin materials."

For a private job, RAP is usually already part of the plant's standard mix, so it shows up as part of the per-ton price rather than a separate line. If you're comparing bids, it's reasonable to ask what mix the plant supplies.

Using the numbers on a bid

Ask each contractor to put the thickness and estimated tons in writing, and whether base stone, grading, and removal are included. With those, you can run the tonnage through the calculator and see what the bid is paying for beyond the asphalt. Medici Construction Group is one licensed option for asphalt paving and site work, holding California A, B and C-10 licenses under CSLB #1114433.

Frequently asked questions

How many tons of asphalt do I need?

Multiply the area in square yards by the thickness in inches and by 110 pounds, then divide by 2,000. A 400-square-foot area at 3 inches needs about 7.3 tons.

How much does asphalt paving cost per square foot?

HomeGuide puts installed asphalt at $3 to $7 per square foot nationally. For parking lots, Angi lists asphalt at $2 to $4 per square foot plus $1.50 to $2 for installation.

How many square feet does a ton of asphalt cover?

According to HomeGuide, about 80 square feet at 2 inches thick, 55 at 3 inches, 40 at 4 inches, and 30 at 5 inches.

How much does a ton of asphalt cost?

HomeGuide says hot-mix asphalt costs $40 to $80 per ton, with delivery adding $4 to $9 per ton within 15 to 20 miles.

Why is an installed price so much higher than the cost of the asphalt?

The installed price covers labor, equipment, trucking, and site preparation as well as the material. HomeGuide puts the asphalt alone at $0.75 to $2.00 per square foot, against $3 to $7 installed.

Why do asphalt paving prices go up and down?

Asphalt binder is a petroleum product, so its price follows oil markets. Public agencies adjust contracts using monthly asphalt price indexes, and private bids reflect the same swings, which is why quotes are usually valid for a limited time.

What is recycled asphalt (RAP)?

Reclaimed asphalt pavement is old asphalt that has been ground up and mixed into new asphalt. The National Asphalt Pavement Association says an average of about 21% RAP in new mixes saves $7.80 per ton compared with all-new materials.

How much does it cost to pave a walkway with asphalt?

HomeGuide puts a 4-by-50-foot walkway at 2 to 3 tons of asphalt, about $120 to $180 in material and $600 to $1,400 installed.

Let's talk about your project

Have a project like this?

Request a bid, or call. A decision-maker answers.

(818) 237-8888